The SUPERPIG infuses high-end tech into our best-selling WARPIG shape for an elite all-mountain deck. If you find yourself seeking out something big and bad, avoid the other pigs and take shelter with the SUPERPIG, because this board is built like a brick shithouse. The SUPERPIG is the same shape as the WARPIG, just with a lot more tech and a little bit of camber. Size the SUPERPIG down 6 to 10cm’s from your standard size because of its innovative shape. The SUPERPIG rides like a very angry WARPIG. This board is made for the demanding rider that wants the aggressive thrash style of the WARPIG with camber and a little more stiffness. Don't let the shape fool you—this board will go anywhere and do anything. Of course, it will still ride powder with its short, wide shape, but you'll be really impressed at how fast the SUPERPIG goes from edge to edge on hardpack and the pop the camber provides. A Tapered Bi-Radial Sidecut maximizes grip and maintains speed in all conditions. Carbon Infused Glass provides extra pop and Carbon Slim Walls reduce weight, increase damping, and increases energy transfer to enhance response and stability. Carbon Array 5™ provides extra pop without adding stiffness while the low friction Race Base is made from a carbon-infused sintered base material to ensure a fast ride.
Size
142, 148, 151, 154, 158
Ability
Intermediate, Advanced
Response
Aggressive
Specialty
All Mountain, Park, Powder
Available In Wide
Yes
CONSTRUCTION:
Extra Camber Profile:
More camber!
Directional Shape:
Designed to be ridden in one direction. More nose than tail, set back stance, and a sidecut to match. Can you still ride it switch? Yeah, of course. Is it going to be as good riding switch all day long? Probably not.
Bi-Radial Sidecut:
A twin sidecut which allows for the underfoot width of a wide board in the tip/tail width of a standard size. This design provides improved leverage on landings, grip through turns, and stability on flat base.
Carbon Slim Walls:
Further improving on Ride's revolutionary Slim Wall technology, Carbon Slim Wall integrates a full-length Carbon-Urethane, composite laminate, that provides additional edge hold and energy transfer over our standard Slim Wall.
Double Impact Plates Laminates:
Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most.
Offered in two levels, Single and Double.
Carbon Array™ 5 Laminates:
This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.
Carbon Infused Glass Fiberglass:
90° Carbon fibers stitched into the glass. Extra pop and response, without adding extra stiffness.
Sintered Low Friction Race Base:
The highest grade carbon-infused sintered base material available. Designed for speed.
Stone Ground Base:
The absolute best way to finish building a snowboard. Nice and flat base, no weird bumps or extra material. Stone ground is the way to go, ask your local tune shop.
Performance™ Core:
High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.
Cleave Edge™ Steel Edges:
Nearly 50% more steel, delivers unmatched resistance to edge cracking and can be detuned to larger radii.
Bio Resin:
Our plant based Bio Resin is one of the biggest impacts for sustainability. By using a Bio based resin instead of a traditional epoxy to assemble boards, we’re able to drastically reduce our carbon emissions while using less toxic chemicals. Win-win for everyone.
Wend® Meadowfoam Biodegradable Wax:
The Meadowfoam® factory wax we use is made from wildflower seeds native to California and Oregon. All WEND® Meadowfoam® snow wax blends are non-toxic and completely biodegradable
30% Recycled Steel Edges:
Everyone knows about recycling, but nobody thinks about it when it comes to snowboard edges. Hell, do people even think about their snowboard edges? Luckily for you we’re thinking of both. Edges on RIDE Snowboards contain 30% recycled materials. That means part of your snowboard could be made out of a car, an airplane, a building, who knows. Anything steel and recycled could turn into a snowboard edge
FSC® Certified Paper Packaging:
What does this mean for snowboard packaging? Well how about those stickers on the base that are a pain in the ass to peel off? Yup, made with FSC® Certified Materials. Boxes the boards are shipped in? Also FCS® Certified.
44% Solar Production Energy:
44% and rising! We’re working with our factories to utilize solar energy when producing RIDE products. We’re currently at using 44% sustainable solar energy, with plans in the works to grow that number in the coming years.
RIDE Snowboard Technology:
Engineered by snowboarders, for the most demanding riders on the planet. With over 30 years of experience in building high-quality products.
