Designed for high-speed turns and the most aggressive of the Pig series boards, the MTNPIG features split tail tech that allows for a more dynamic turn shape and board flex through turns. Ride the MTNPIG in your standard board length—unlike the rest of the Pig series, we don't suggest sizing down on this model. The half-moon split tail shape helps it sink in deep snow while providing a long effective edge, increasing overall edge hold for sketchy situations. Tapered Linear Quadratic sidecut allows for smooth turn initiation and powerful support through the turn without losing grip. Carbon Slim Walls reduce weight, increase damping, increase energy transfer to enhance response and stability while Carbon-Infused Glass provides extra pop. The MTNPIG is running wild and fast through the mountains, growing fat on powder, and should only be approached by an advanced rider.
Size
155, 159, 160W, 162
Ability
Intermediate, Advanced
Response
Aggressive
Specialty
All Mountain, Powder
Available In Wide
Yes
CONSTRUCTION:
Extra Camber Profile:
More camber!
Directional Shape:
Designed to be ridden in one direction. More nose than tail, set back stance, and a sidecut to match. Can you still ride it switch? Yeah, of course. Is it going to be as good riding switch all day long? Probably not.
Split Tail Shaping:
Split Tail technology allows for more dynamic turn shape and board flex, creating a unique ride in powder and hard pack.
Linear Quadratic Sidecut:
A directional sidecut utilizing Quadratic curvature from the tip to the rear insert pack, then progressing into a linear section into the tail. This creates smooth catch-free turn initiation and powerful support through the turn exit without losing grip.
Carbon Slim Walls:
Further improving on Ride's revolutionary Slim Wall technology, Carbon Slim Wall integrates a full-length Carbon-Urethane, composite laminate, that provides additional edge hold and energy transfer over our standard Slim Wall.
Double Impact Plates Laminates:
Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most.
Offered in two levels, Single and Double.
Carbon Array™ 5 Laminates:
This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.
Carbon Infused Glass Fiberglass:
90° Carbon fibers stitched into the glass. Extra pop and response, without adding extra stiffness.
Sintered 4000 Base:
High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.
Stone Ground Base:
The absolute best way to finish building a snowboard. Nice and flat base, no weird bumps or extra material. Stone ground is the way to go, ask your local tune shop.
Performance™ Core:
High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.
Standard Top Sheet Edges:
Durable Urethane topsheet material with graphics only RIDE can bring you.
Bio Resin:
Our plant based Bio Resin is one of the biggest impacts for sustainability. By using a Bio based resin instead of a traditional epoxy to assemble boards, we’re able to drastically reduce our carbon emissions while using less toxic chemicals. Win-win for everyone.
Wend® Meadowfoam Biodegradable Wax:
The Meadowfoam® factory wax we use is made from wildflower seeds native to California and Oregon. All WEND® Meadowfoam® snow wax blends are non-toxic and completely biodegradable
30% Recycled Steel Edges:
Everyone knows about recycling, but nobody thinks about it when it comes to snowboard edges. Hell, do people even think about their snowboard edges? Luckily for you we’re thinking of both. Edges on RIDE Snowboards contain 30% recycled materials. That means part of your snowboard could be made out of a car, an airplane, a building, who knows. Anything steel and recycled could turn into a snowboard edge
FSC® Certified Paper Packaging:
What does this mean for snowboard packaging? Well how about those stickers on the base that are a pain in the ass to peel off? Yup, made with FSC® Certified Materials. Boxes the boards are shipped in? Also FCS® Certified.
44% Solar Production Energy:
44% and rising! We’re working with our factories to utilize solar energy when producing RIDE products. We’re currently at using 44% sustainable solar energy, with plans in the works to grow that number in the coming years.
RIDE Snowboard Technology:
Engineered by snowboarders, for the most demanding riders on the planet. With over 30 years of experience in building high-quality products.
